What is BTU, and what does an AC rating mean?
A British thermal unit (BTU) is a unit of energy. On an air conditioner, BTU/hr tells you how quickly the unit can remove heat. A 10,000 BTU/hr cooling rating describes delivered capacity. To estimate electricity cost, use the unit’s electrical input and expected run time in the Air Conditioner Energy Cost Calculator.
How to use this AC BTU calculator
- Enter floor area, or measure the room’s length and width. For an irregular room, add up its sections first with the Square Footage Calculator.
- Enter the ceiling height, sun exposure and number of people who regularly use the room. Select Kitchen if the unit will serve one.
- Choose the chart baseline or compare a mild, hot or very hot summer scenario. Select Calculate Cooling Capacity and review the chart value and the adjustments separately.
Changing between feet and meters converts the numbers already entered. Use m² for area and meters for length, width and ceiling height in metric mode.
What goes into the cooling estimate?
Start with the ENERGY STAR room air conditioner chart for an 8-foot ceiling. At a shared boundary, this calculator uses the higher row: 250 ft², for example, starts at 7,000 BTU/hr. Very sunny rooms add 10% to the starting capacity and heavily shaded rooms subtract 10%. Each regular occupant above two adds 600 BTU/hr, and a kitchen adds 4,000 BTU/hr.
For taller ceilings, the planning scenario scales the sun-adjusted starting capacity by ceiling height divided by eight. Below eight feet the chart capacity stays unchanged. The climate option then changes that ceiling- and sun-adjusted amount by the selected percentage. Occupancy and kitchen additions are separate. The climate percentages and ceiling scaling are this tool’s heuristics. They do not use local design temperatures, insulation, humidity or air leakage.
Worked example for a sunny 320 ft² room
The chart starts at 8,000 BTU/hr. A very sunny room adds 800 BTU/hr, and a third regular occupant adds 600 BTU/hr. With an 8-foot ceiling, chart-baseline climate and no kitchen, the result is 9,400 BTU/hr, or about 2.75 kW of cooling capacity. Select Load worked example to enter these figures.
kW to BTU/hr calculator
Compare nameplate cooling ratings in the same units. Multiply kW by about 3,412.14 to get BTU/hr. Divide BTU/hr by that factor to get kW. For example, 3 kW corresponds to about 10,236 BTU/hr.
Using this estimate for a window AC or mini-split
For a window AC, compare the room estimate with the listed cooling capacity. If you came looking for a mini split BTU calculator, you can use this result as an initial cooling estimate for one zone. Have the installer check the zone’s cooling and heating loads, and compare them with the equipment’s capacity and operating range under local conditions. Homes with several rooms, large windows or unusually high ceilings benefit from a detailed load calculation.
Cooling BTU vs. heating BTU
A heating BTU calculator estimates heat that must be added on cold days. A garage heater BTU calculator also needs assumptions about insulation and door openings. A furnace size calculator or boiler BTU calculator has to account for the building’s heating load and equipment output. Use the room estimate on this page for cooling.
Frequently asked questions
Do I need to enter a climate scenario?
Choose chart baseline for the unmodified climate assumption. The other options help compare scenarios using the percentages shown in the form.
How many BTUs are needed for a 300 ft² room?
The starting chart capacity is 8,000 BTU/hr at 300 ft² in this calculator. Sun exposure, occupants, a kitchen and planning choices can change the result.
Can I use this estimate for my whole house?
Use the chart for one room or open zone. For a whole house, have a qualified professional calculate the load and select equipment for the building and local climate.
Does the kW result tell me electricity use?
It expresses the same cooling capacity as the BTU/hr result. Use electrical input in watts or kW and operating time to estimate energy use.
